Stereo Linestage Preamplifier

C-03Xs

A new standard is born

C-03Xs
C-03Xs

Stereo Linestage Preamplifier

C-03Xs

SPECIFICATIONS

This model has been discontinued.

Read the features

Spec description

Analog audio inputs  
XLR 2 pairs
Inputimpedance 10kΩ (LINE)
Input sensitivity  
at Rated output 510mV
at 800mV output 200mV
Maximum input level 12V
RCA 3 pairs (RCA 2 can be used as an AV pre-input. RCA3 can be changed to PHONO input with version-up service.)
Input impedance 10kΩ (LINE)
Input sensitivity  
at Rated output 510mV
at 800mV output 200mV
Maximum input level 12V
Analog audio outputs  
XLR 2 pairs
Output impedance 100Ω (LINE)
Rated output 2V
Maximum output level 15V (1kHz, 0.003%)
RCA 2 pairs
Output impedance 47Ω (LINE)
Rated output 2V
Maximum output level 7.5V (1kHz, 0.003%)
General  
Power supply  
  AC 230V, 50Hz
  AC 120V, 60Hz
  AC 220V, 60Hz
Power consumption 19W
External dimensions (W×H×D) 445 × 162 × 457mm
17-⅝" × 6-½" × 18" (including protrusions)
Weight 28kg / 61-¾ lb
Included accessories Power cord × 1
Remote cotrol (RC-1334) × 1
AA batteries × 2
Felt pads × 4
Owner's manual × 1
Warranty card × 1

 

Audio performance

Frequency response 1Hz to 200kHz (–3dB)
3Hz to 50kHz (–0.2dB)
S/N ratio 116dB (2V input, A weight)
Total harmonic distortion  
XLR 0.0004%
RCA 0.0006%
Gain +12dB

 

  • This product is available in three different power supply variations, as shown in the chart above. Make sure that the voltage shown on the rear panel matches the AC line voltage in your area.
  • The shape of the AC inlet and plug of the supplied power cord depends on the voltage rating and destination country.
  • Design and specification are subject to change without notice.
  • Weight and dimensions are approximate.