Integrated Amplifier
I-05
A sleek integrated amplifier
Integrated Amplifier
I-05
SPECIFICATIONS
This model has been discontinued.
Spec description
| Speaker output | |
| Rated output power | 120W + 120W (6Ω) |
| Maximum output power | 190W + 190W (6Ω) |
| Minimum required impedance | 4Ω |
| Speaker terminals | Screw type × 1 set |
| Analog audio inputs | |
| XLR | 1 pair |
| RCA | LINE: 3 pairs, PHONO: 1 pair |
| Input impedance | |
| LINE | 100kΩ |
| PHONO MC | 100Ω |
| PHONO MM | 47kΩ |
| Analog audio outputs | |
| RCA | 1 pair |
| Output impedance | 220Ω |
| General | |
| Power supply | |
| AC 230V, 50Hz | |
| AC 220V, 60Hz | |
| Power consumption | 70W |
| External dimensions (W×H×D) | 445 × 131 × 389mm 17-½" × 5-⅛" × 15-¼" (including protrusions) |
| Weight | 17 kg / 37-½ lb |
| Included accessories | Power cord × 1 Remote control (RC-1301) × 1 AAA batteries × 2 Owner's manual × 1 Warranty card × 1 |
Audio performance
| Frequency response | 5Hz to 70kHz (+0dB, –3dB, 6Ω) |
| S/N ratio | 121dB (JEITA) |
| Total harmonic distortion | 0.025% (1kHz, 6Ω) |
- This product is available in two different power supply variations as shown in the chart above. Make sure that the voltage shown on the rear panel matches the AC line voltage in your area.
- The shape of the AC inlet and plug of the supplied power cord depends on the voltage rating and destination country.
- Design and specifications are subject to change without notice.
- Weight and dimensions are approximate.